FPS issues guidance on safe tool handling

The UK Federation of Piling Specialists (FPS) has established and agreed on guidance that covers the handling of tools during specialist geotechnical operations
FPS issues guidance on safe tool handling FPS issues guidance on safe tool handling FPS issues guidance on safe tool handling FPS issues guidance on safe tool handling FPS issues guidance on safe tool handling

The new guidance covers the handling of augers, casings and rods during minipiling and other specialist geotechnical operations undertaken by manual labour, which may typically involve lifting, moving and positioning of often heavy components during the drilling process.

The issue of the guidance document follows the analysis of accident reports, which highlighted the handling of specialist geotechnical operations as a high-risk activity, along with evidence that this heavy manual labour and the awkward postures often involved are all risk factors in the potential development of musculoskeletal disorders. FPS members have reported a number of incidents where operative's hands have been trapped and injured in the process.

Speaking about the guidance Alasdair Henderson, chair of the FPS, said: "The Federation of Piling Specialists promotes best practice to ensure that its members maintain the highest standards of safety, and this new guidance is a part of its commitment to driving industry safety standards forward."

"The guidance states that wherever reasonably practical, handling of augers, casings and rods during minipiling and other specialist geotechnical operations shall be achieved by either of the following methods: a mechanised tool-handling system be fitted to the rig, for example a carousel, magazine; or a mechanised tool-handling device that can be attached to supporting equipment, such as an excavator's quick-hitch."

In addition to the new guidance, members are working on sharing best practices both with each other and with machine manufacturers to address this key issue and ensure that the necessary tools are available. Such tools are already being employed on a number of projects, and all members undertaking these operations are working hard to comply with the guidance.

topics